short circuit control
英 [ʃɔːt ˈsɜːkɪt kənˈtrəʊl]
美 [ʃɔːrt ˈsɜːrkɪt kənˈtroʊl]
网络 短路控制
双语例句
- With the developing trend of larger, faster and automated ship, the ship electric plant installation capacity is increasing as well as the short circuit current, thus, the control of electric system short circuit current has become a problem await to solve.
随着船舶大型化、高速化和自动化，船舶电站的安装容量越来越大，相应地短路电流也随之增大，限制电力系统短路电流已成为一个有待解决的问题。 - Based on the principle of flow field superimposition, the mathematical model of short circuit flow field, which add a new style and high efficiency product of technology for the control and administration of environment producing poisonous and harmful dust.
通过流场叠加原理，建立了流场数学模型，为煤矿综掘及相关的粉尘治理工程增加了一项新的技术与新型产品。 - Connecting with different peripheral devices, the circuit can also have the functions of short circuit protection, soft start and four kinds of dimming control.
电路与少量的外围器件搭配之后，即可对串联LED驱动供电。通过各种不同的外围应用电路能实现短路保护、软起动及四种调光控制方式，应用非常灵活。 - A new device detecting ground fault and short circuit protection for DC control circuit
一种新型微机直流操作回路接地检测和短路保护装置的研制 - Technical parameters of open circuit voltage, load voltage and short circuit current were determined seperately to control the quality of battery products and remove the defeats.
本文旨在论述分别用测定电池开路电压、负荷电压、短路电流的办法控制剔除不良品。 - Present situation of short circuit current control in Shanghai power grid and Countermeasures
上海电网短路电流控制的现状与对策 - During short circuit of welding arc, the control mode of short circuit dividing frequency is used to control short-circuit current.
系统对焊接电弧的短路过程采用了短路分频的控制方式，并进行短路电流的控制。 - Arc behavior of CO_2 short circuit welding under waveform control
波控CO2短路过渡焊的电弧行为 - The design part of the HV power supply included rectifier and filter, power stage topology, short circuit protection, parameter selecting and control circuit design etc.
在设计部分详细的给出了整个高压电源的设计过程，主要包括了整流滤波电路、功率级拓扑选择、参数确定、保护电路设计、高压高频变压器设计、控制电路的设计等。 - Based on the normal and the transient short circuit frequency in the GMAW welding process of droplet transferring, the realtime evaluation and control system of parameters in the welding process was designed and implemented.
在短路过渡GMAW焊中以正常短路频率和瞬时短路频率为评价指标，设计并实现了一套焊接过程参数质量实时评价控制系统。 - The monolithic IC is designed to have not only the functions of drive, over current protection, short circuit protection and so on, but the function of delay intelligent control.
对其中的设计重点单片IC进行了优化设计，使之不仅具有通常的驱动和过流、短路、过热、欠压等保护功能，而且保护电路本身具有延时智能处理的功能。 - The RC snubber circuit in inverter main circuit, the signal detecting circuit during the short circuit of CO_2 ( Carbon Dioxide) welding, and the MCU waveform control system are all designed and debugged in the dissertation.
本文以波控逆变CO2焊机为研究对象，主要对逆变主电路中的RC缓冲电路、CO2焊短路过渡中的信号检测电路、微机控制系统等进行了设计与调试。 - During the short circuit period of CO 2 welding, under the real-time control of a microcomputer system, the IGBT circuit can cut off partial current wave and realize a quantitative control of welding current waveform.
此电路在微机系统实时控制下，能对CO2焊短路电流进行局部削波，起到定量控制短路电流波形的作用。 - Based on the feature of CO 2 short circuit arc welding, this paper presents a new method of control of IGBT inverter power by single chip processor to reduce welding spatter and improve welding formation.
本文根据CO2短路过渡焊接过程的特点，提出了一种IGBT逆变电源的单片机控制方法，旨在降低CO2短路过渡焊接的飞溅和改善焊后成形。 - Short circuit devices operating control design issues analysis
断路器操作控制设计相关问题分析 - The process of short circuit transition is non-linear and with many influencing factors, and it is difficult to find an ideal model for control.
短路过渡的CO2气体保护焊过程具有非线性和不确定性，干扰因素众多，很难得到一个理想的数学模型进行控制。 - Discussion on Short Circuit Current Control in Shandong Power Grid
山东电网短路电流控制问题探讨 - Several short circuit current control methods has been set forward in this article.
文章介绍了几种短路限制的方法。 - Large numbers of data about ship power stations is referenced. First, short circuit values are calculated. According to these values and requirements of ship power protection, breakers, control transformers, current transformers and other devices of the switch board are chosen.
参考大量远洋船舶电站系统的技术资料，首先计算出系统的短路电流，并根据计算结果与船舶配电保护要求，对配电板的断路器、控制变压器、电流互感器等元件进行选型工作。 - This article aims to two system faults which caused by Three Phase Short Circuit and Single Phase Earthing, and the enhancement of System Transient Stability by adopting Fast Valving and SVC Compensate and Cooperative Control.
本文针对系统发生三相短路和单相接地两种故障情况，在故障期间同时采用快关汽门调速与SVC补偿协调控制来提高系统暂态稳定性。 - Low-voltage circuit breakers is an important electrical apparatus device used for providing protection for power network and industrial equipments against all types of breakdown such as overload 、 short circuit and creepage, and controller is the central control unit for measuring and protecting function.
低压断路器是保护电气配电网络和工业设备免受过载、短路和漏电等故障危害的重要电气元件，控制器是其实现测量和保护等功能的核心控制单元。